Safe filter monitoring with differential pressure gauges

Filter monitoring is a core task of differential pressure gauges ? the differential pressure increases when the filter becomes clogged. The measuring instruments thus signal when the filter has to be cleaned or replaced. The efficiency of such a solution could be illustrated by the exemplory case of WIKA pressure gauges of the DELTA-line series in water treatment.
With microswitch and operating display ? the WIKA model DPGS40 differential pressure gauge enables safe filter monitoring.
In the water industry, reverse osmosis is really a widely used process to separate water from unwanted substances. The corresponding filter systems work with semi-permeable membranes.
For filter monitoring, an international solution provider for the treating drinking, industrial and wastewater uses WIKA model DPGS40 differential pressure gauges in its plants in Germany. The instrument measures the pressure on both sides of the membrane.
Timely intervention at the filter
As well as the on-site display of the differential pressure, the pressure gauge has an integrated microswitch. This sends a warning signal to the control centre whenever a defined limit value is reached. This enables the operator to set up for timely cleaning or replacement of the filter. Because of its mechanical measuring principle, the filter monitoring also functions reliably in case of a power failure.
Continuous monitoring
Prompt intervention at the filter is necessary for just two reasons. Firstly: It prevents possible contamination of the water. Secondly: The operator saves energy through the help of continuous filter monitoring. The more fouled a filter is, the harder the pump has to work for the desired media flow.
Integrated working Packed chose the DELTA-line pressure gauge for filter monitoring for just one more reason ? due to the integrated working pressure indication. This information is essential to the plant manager since it allows him to draw conclusions concerning the respective pump performance. To obtain this information minus the two-in-one solution, he would otherwise have had to set up an additional measuring location.
Further measuring requirements
As well as filter monitoring, the differential pressure gauges of the DELTA-line series are suitable for tasks in level and flow measurement. In different versions, they cover an array of applications. DPGx instruments are available with analogue signal output and up to two microswitches. All have ATEX approval. Gleam variant with SIL certification and DNV-GL approval for marine applications.
Note
An overview of most instruments in the DELTA-line series are available in our flyer. Further technical information on the products can be found in the pressure gauge and contact pressure gauge products on the WIKA website. Should you have any questions, your contact will gladly assist you to.
Also read our article
Filter monitoring: An essential component for energy-efficient operation

Leave a Comment