Terrorist in vacuum pressure process must master a major challenge ? it must deliver a trusted measuring result, even though the pressure drops and the temperature rises simultaneously. The example of a chemical company producing phthalic anhydride (PA) demonstrates it is by no means self-evident that this requirement could be met on a consistent basis.
PA is primarily used as a plasticiser for plastics. However, it is also used in the production of synthetic resins and dyes. Cadaver obtains this compound via the catalytic oxidation of o-xylene in the gas phase, accompanied by vacuum pressure distillation process.
Critical phase for pressure measurement
In this process, the critical phase for pressure measurement occurs in the distillation column. There, the procedure temperature can rise to more than 230 �C while the pressure drops to 100 mbar abs. With such a contrary action, the conventional installed measurement technology reaches its performance limit relatively quickly, that your aforementioned manufacturer was forced to learn ? all instrumentation showed a measurement deviation outside the defined tolerance after only a fortnight.
Diaphragm seal system adapted in every elements to the vacuum process
The diaphragm seal system is tailored exactly to the conditions of the vacuum process and tested under application conditions.
Consequently, the business approached WIKA with the obtain a measuring solution that could also fulfil its task with the mandatory accuracy in the long run beneath the conditions described. WIKA then drew on its in-depth expertise to create a diaphragm seal system for the vacuum process, comprising an activity transmitter (model IPT-20), a flange-type diaphragm seal with flush diaphragm (model 990.27) and a capillary.
All components of this measuring system were selected designed for the application form. Silicone oil KN32 was therefore selected as the fill fluid for pressure transmission. The cleaning and conditioning of the diaphragm seal, the capillary, the bond pieces plus the automated filling process were also matched to one another exactly. With sensitive limit ranges, even one drop of liquid an excessive amount of or too little can destabilise the volume balance of the diaphragm seal system and thus impair its function. Consequently, correct measurement would no longer be guaranteed.
Test under application conditions
After cleaning, all parts of the diaphragm seal system were first fully welded right into a single unit as usual, followed by the filling and adjustment of the system. Before delivery, however, there was another crucial step ? in its laboratory, WIKA simulated a vacuum process for the diaphragm seal system in accordance with the client?s conditions and subjected it to a thermal ageing process. This test confirmed the process suitability of the measuring system.
Note
More info on the WIKA diaphragm seal systems can be found on the WIKA website. For those who have any questions, your contact will gladly assist you to.
Also read our posts
Diaphragm seals for stable flow measurement in deep seas
How do diaphragm seals work?
Watch the following video to learn more about the functionality, application areas and benefits of diaphragm seals: